Skip to Content
Search
Your Cart
Loading...
Categories
Loading...
Home Search 0 Wishlist
  1. Products
  2. Armatures
  3. Special armatures - 9618 items
Armatures
Store
Category
Filter Search
Guide
Sort By: Featured

Special armatures

STASTO Allgemeine Preisliste (EUR)
SG06-80-UWC80-01
Control valve Type SG06; DN80; PN10/40; NC; Material: Zinc plated steel, Fixed disc 1.4571 Coated; Sliding disc Carbon material; Kvs-value 58 (63%), Characteristic linear, Actuator diameter 80mm; Digital positioner; 4-wire; 4-20mA
5-VMK40NC-553690
2/2-way coaxial valve; G11/2"; 0...100bar; 220VDC, DN40; NC; Externally controlled; Body: Stainless steel; Medium: Water; Incl. 5/2-way pilot valve; Incl. 1 inductive limit switch (B) For closed-position; Special version
5-VSVF80NC-525246
2/2-way coaxial valve, DN80, PN40 0-40 bar, 24VDC, NC, pilot-operated Body: zinc-plated steel, Medium: mineral oil (ISOVG100) incl. 5/2-way pilot valve (ISO1), LED and CE0589 marking
SG06-50-WWN80-01
Control valve Type SG06; DN50; PN10/40; NC; Material: 1.4408 Respectively 1.4408/1.4401, Fixed disc STN2; Sliding disc STN2/STN3; Kvs-value 45 (100%), Characteristic linear, Actuator diameter 80mm; Digital positioner; 4-wire; 4-20mA; Connector M12x1
6-MBMK15NC-537362
6-way manifold block consisting of 6 pcs. MK15NC, module connection 1" outlet 3/4", 0-40 bar, DN 15, NC, 24VDC, direct-acting module: aluminium, valve: brass medium: emulsion/oil, incl. connector M12x1 (Desina) 1 pc. end cover aluminium with additional thread 1" and special seals
CVTE-50-NC-005
2/2-way coaxial valve; Externally controlled; G2"; 0...100bar; DN50; NC; Body: Stainless steel; Medium: Hydrogen Gaseous; Special seals; Special version
SG08-65-WWC-EC1-01
Control valve with electrical actuator Type SG08; DN65; PN10/40; Body: Stainless steel AISI 316, Fixed disc 1.4571; Sliding disc Carbon material; Kvs-value 52 (100%); Characteristic linear; Voltage 90-260VAC; Control actuator CA260; Position electronics 4-20mA; Position feedback 4-20 mA; 2 Limit switch
SG06-80-UWF125-01
Control valve Type SG06; DN80; PN10/40; NC; Material: Zinc plated steel; Fixed disc 1.4571 Coated; Sliding disc SFC; Kvs-value 92 (100%), Characteristic linear; Actuator diameter 125mm; Digital positioner; 4-wire; 4-20mA
BS08-65-T-D0-01
Ball sector valve With pneumatic actuator; Wafer type; DN65; PN25; Body 1.4408/1.4404; Ball sector 1.4408 Hard chrome plated/Lapped surface; Seat ring Stellite; Seals FKM/PTFE; KVS 190 (100%); Medium temperature -15...+200°C; Double acting actuator; Control pressure 5,5...8bar; Actuator PAD115
8021-GS1-050-4066943
050VG0113M--91-1ZC GS1 control valve, DN50, PN10/40, N0 body 1.4571/1.4581, sliding pair STN2, actuator 125 cm² KV 19 (100%), characteristic equal percentage, incl. digital positioner 8049, 4-wire
SG17-40-WWF4/10-01
Sliding gate-pressure regulator; Controlled by own medium; Nominal pressure PN10/40; Wafer type; Material Stainless steel 1.4408; Diaphragm CR; Fixed disc Stainless steel AISI 316Ti coated; Sliding disc SFC; Nominal diameter 40mm; Kvs-value 26 (100%); Characteristic Linear; Pressure range 4...10bar; Length 33mm; Incl. equalizing tank
SE35-T15-ZP1253
Aseptic valve; Angle type; NC; Material: 1.4435 Polished RA<0,6µm, Control cone PEEK; Diaphragm EPDM/PTFE; Tri-clamp according to inch; DN 15mm; Kvs-value 3,5 (100%), Characteristic linear, Actuator diameter 125mm; Medium temperature -20...+140°C; Operating pressure 0...14bar; Digital positioner; 4-wire; 4-20mA; Position indicator 4-20mA; EHEDG Certificate
SG14-15-WWN12503-01
Sliding gate valve with diaphragm-actuator Type SG14; DN15; PN100; Body: Stainless steel AISI 316Ti, Fixed disc STN2; Sliding disc STN2/STN3; Kvs-value 2,6 (63%); Characteristic linear; Diaphragm actuator 125cm²; Incl. I/P-positioner PS2 6DR 5010-0N, IP66; Safety position; Spring closed; Special version
CVF-32-NC-011
2/2-way coaxial valve; Flange ANSI-RF 600 IB; 0...100bar; 230VAC; DN32; NC; Directly operated; Body: Stainless steel;Medium: Air; Incl. LED; With 2 mechanical limit switches; Special version
CVF-80-NC-013
2/2-way coaxial valve; Directly operated; Flange DN80 PN16; 0…16bar; 230VAC; NC; Body: Zinc plated steel; Medium: Diesel; Special seals; Incl. inspection certificate 3.1; Incl. 2 inductive limit switches OPEN/CLOSED (I.); Special version
SG07-50-WWC1253-04
Control valve Type SG07, DN50; PN16/40; NC; Material: 1.4408; Fixed disc 1.4571 Coated; Sliding disc Carbon material; Kvs-value 45 (100%); Characteristic Linear; Diaphragm actuator 125cm²; Digital positioner; 4-wire; 4-20mA; Feedback module RM5; 4-20mA
CVT-50-N0-002
2/2-way coaxial valve; directly operated; G 2"; 0...16bar; 24VDC; DN50; NO; body: stainless steel; medium: hydraulic oil containing ester ; special seals; incl. 2 inductive limit switches OPEN/CLOSED (B.); special version
SG21-100-UWCECB-01-3C
Control valve Type SG21, DN100; PN40; Material: Carbon steel; Fixed disc 1.4571 Coated; Sliding disc Carbon material; Kvs-value 154 (100%); Characteristic Linear; Electric control actuator 90-260V 50-60Hz; Control signal And Position feedback 4-20mA; Incl. Inspection certificate EN-10204-3.1; For material, pressure, function and tightness
SG28-15-WWC1253-01
Control valve Type SG28; High temperature design; DN15; PN100; NC; Body: Stainless steel 1.4581 / 1.4571; Fixed disc 1.4571; Sliding disc Carbon material; Kvs-value 4 (100%); Diaphragm actuator 125cm²; Temperature range -60...+450°C; Pressure range 0...100bar
CVFEH-20-NC-001
2/2-way coaxial valve; Externally controlled; Flange DN20; ANSI-RF 1500 lb; 0...200bar; NC; Body: Stainless steel; Medium: Fuel 60°C; Special seals; Preparation for limit switch; Inspection certificate 3.1; Mounting bracket; Incl. material certificate; ATEX Ex II 2G Ex h IIC T-20°C...+70°C Gb; Ex II 2D Ex h IIIC T-20°C...+70°C Db; Special version