Skip to the content

accessories for manometers

protection cap

material rubber; suitable for connection below/rear

manometer sealing

self sealing adapter

material brass

manometer adapter series TH93

extension

impact absorber for manometers series AB01

siphon in U-shape according to DIN 16282 series SI001

connection spigot; pressure tap horizontal only; clamping sleeve according to DIN 16283, AF27; operating pressure max. 160bar at 120°C at siphon inlet, max. 120bar at 300°C at siphon inlet, max. 100bar at 400°C at siphon inlet

siphon in U-shape according to DIN 16282 series SI002

welding connection; pressure tap horizontal only; clamping sleeve according to DIN 16283, AF27; operating pressure max. 160bar at 120°C at siphon inlet, max. 120bar at 300°C at siphon inlet, max. 100bar at 400°C at siphon inlet

siphon in ring-shape according to DIN 16282 series SI003

connection spigot; pressure tap vertical only; clamping sleeve according to DIN 16283, AF27; operating pressure max. 160bar at 120°C at siphon inlet, max. 120bar at 300°C at siphon inlet, max. 100bar at 400°C at siphon inlet

siphon in ring-shape according to DIN 16282 series SI004

welding connection; pressure tap vertical only; clamping sleeve according to DIN 16283, AF27; operating pressure max. 160bar at 120°C at siphon inlet, max. 120bar at 300°C at siphon inlet, max. 100bar at 400°C at siphon inlet

manometer stopcock series MSC01

female thread/female thread; temperature max. 50°C; drain hole

manometer stopcock series MSC02

female thread/spigot; temperature max. 50°C; drain hole

manometer stopcock series MSC03

female thread/swivel sleeve; temperature max. 50°C; drain hole

manometer stopcock series MSC04

spigot/swivel sleeve; temperature max. 50°C; drain hole

manometer stopcock series MSC05

spigot/clamping sleeve; temperature max. 50°C; drain hole

manometer push button valve series MPB01

pressure measuring at pressed button only, after releasing valve closes automatically; manometer is depressurized in normal position; pressure range max. 25bar, DVGW-certification max. 4bar

manometer stop-valve series MSV01

according to DIN 16270; spigot/clamping sleeve

manometer stop-valve series MSV02

according to DIN 16270; spigot/swivel sleeve, shank for holder of measuring instruments

manometer stop-valve series MSV03

according to DIN 16271; spigot/tension sleeve with test spigot M20x1,5

manometer stop-valve series MSV04

according to DIN 16271; spigot/swivel sleeve, shaft for holder of measuring instruments with test spigot M20x1,5

manometer stop-valve series MSV05

according to DIN 16271; spigot/tension sleeve with test flange 60x25x10