Skip to the content

Industrial standard cylinders with accessories

industrial standard-cylinder series CA

round cylinder according to ISO6020/1; operating pressure ...160bar; operating temperature -10...75°C; piston Ø40...320mm; stroke tolerance +/- 1mm suitable for strokes ...500mm, +/- 2mm suitable for strokes 501...1500mm, +/- 3mm suitable for strokes 1501...3000mm, >3000mm +/- 4,5mm; piston speed max. 4m/s; 8 different mounting versions available; following options are available: cushions, magnetic piston, leakage port, air relieving, spacers, special seals

industrial standard-cylinder series CC

round cylinder according to ISO6022/DIN24333; operating pressure ...250bar; operating temperature -10...75°C; piston Ø50...320mm; stroke tolerance +/- 1mm suitable for strokes ..500mm, +/- 2mm suitable for strokes 501...1500mm, +/- 3mm suitable for strokes 1501...3000mm, >3000mm +/- 4,5mm; piston speed max. 4m/s; 5 different mounting brackets available; following options are available: cushions, magnetic piston, leakage port, air relieving, spacers, special seals

industrial standard-cylinder series CH

tie-rod type according to ISO6020/2/DIN24554; operating pressure ...210bar; operating temperature -20...80°C; piston Ø25...200mm; up to 3 different piston rod diameter per piston diameter; stroke tolerance 0...1,2mm suitable for strokes ...1000mm; >1000mm 0...2,5mm; piston speed max. 4m/s; 14 different mounting brackets available; following options are available: cushions, end position detection, integrated position measuring system, magnetic piston, leakage port, air relieving, spacers, special seals, CETOP-plate structure, through-rod

block cylinder series CB

operating pressure ...160bar; operating temperature -20...80°C; piston Ø25...100mm; smaller strokes are just available with internal stroke-limiter; stroke tolerance +/- 0,5mm; piston speed max. 0,1m/s; 4 different types available; following options are available: magnetic piston, special seals

ball joint series AS

according to ISO 6982; grease nipple

rod clevis series FI

according to ISO 8133

ball joint series 0S

according to ISO 8133/DIN 24555; grease nipple

fixed eye series 0F

female thread

rod clevis series AF

according to ISO 8132

bearing bracket series AM

according to ISO 8133

clevis-bearing bracket series AP

according to DIN 24556

trunnion-bearing bracket series 0ISH

grease nipple